IC694ALG542LT  Low Temperature RX3i Efficiency combination analog module, 4 in voltage/current and 2 out voltage/current with 16 bit resolution and advanced diagnostics. Requires Proficy® Machine Edition Logic Developer 6.5 SIM 5 and above CPU firmware 6.5 and above.

IC694APU300  High speed counter module 200KHZ A B and C type, enhanced mode up to 1MHz with 2MHz internal oscillator

IC694APU300CA  Conformal Coated High speed counter module 200KHZ A B and C type, enhanced mode up to 1MHz with 2MHz internal oscillator

IC694APU305  I/O Processor high speed counter for Gray Code Encoder or A QUAD B Encoder. 30 kHz Abolute Encoder or 200 kHz A QUAD B Encoder.

IC694BEM320  RX3i Communication Module, I/O Link Interface Module (Slave). Module uses RX3i high speed serial bus.

IC694BEM321  RX3I Communication Module, I/O Link Interface Module (Master). Module is on the high speed serial bus.

IC694BEM331  RX3i Genius Bus Controller (supports I/O and Datagrams). Module connectsto the serial bus. Requires CPU firmware 2.9 or higher and requires Proficy Machine Edition Version 5.00 SP1A Logic Developer-PLC, Hot Fix 1or later for configuration.

IC694BEM331CA  Conformal Coated Genius Bus Controller

IC694BEM331LT  Low Temperature Tested Genius Bus Controller

IC694CBL005  .5 meter cable between IC694TBC032 and IC694RTB032

IC694CBL010  1.0 meter Cable between IC694TBC032 and IC694RTB032

IC694CBL030  3.0 meter Cable between IC694TBC032 and IC694RTB032

IC694CBL130  3 meter Cable with IC694TBC032 connector on one end and open wire on other end

IC694CEE001  RX3i CEP EXPANSION CARRIER

IC694CHS392  Base Expansion 10 Slots

IC694CHS392CA  Conformal Coated 10 slot I/O expansion base.

IC694CHS398  Base Expansion 5 Slots

IC694CHS398CA  Conformal Coated 5 slot expansion base.

IC694DNM200  DeviceNet Master Module for RX3i. Module can only be located in the CPUbase. The module is on the high speed serial bus.

IC694DSM314  MOTION CONTROLLERMODULE 1-2 axis Digital Servo or 1-4 Axis Analog Servo

IC694DSM324  DSM324 motion controller module for the RX3i

IC694MDL230  Input module, 120 VAC 8 point, isolated per point.

IC694MDL230CA  Conformal Coated Input module, 120VAC 8 point isolated.

IC694MDL231  Input module, 240 VAC 8 point, isolated per point.

IC694MDL240  Input module 120 VAC, 16 points.

IC694MDL240CA  Conformal Coated Input module 120 VAC 16 point

IC694MDL241  Input module 24 VAC, 16 points.

IC694MDL241CA  Conformal Coated Input 24 VAC 16 points.

IC694MDL250  120 Vac Isolated Input (16 points). Module requires a terminal block IC694TBBx32 or IC693TBSx32). Only compatible with RX3i controllers. Compatible high speed serial bus on both Universal Base and Standard expansion base. Requires firmware 3.5 and ME

IC694MDL260  Input module 120 VAC, 32 points. Module requires a terminal block IC694TBBx32 or IC693TBSx32). Only compatible with RX3i controllers. Compatible high speed serial bus on both Universal Base and Standard expansion base. Requires firmware 3.5 and above

IC694MDL310  Output module, 120 VAC 0.5 amps 12 points.

IC694MDL330  Output module 120/240 VAC 2amps 8 Points.

IC694MDL340  Output module 120 VAC 0.5 amps 16 Points.

IC694MDL340CA  Conformal Coated 120/240 Output module, 0.5A,16 points

IC694MDL350  120/240 Vac Isolated Output, 2 Amp (16 Points). Module requires a terminal block (IC694TBBx32 or IC693TBSx32). Only compatible with RX3i controllers. Compatible high speed serial bus on both Universal Base and Standard. Requires firmware 3.5 and ME 5.5

IC694MDL390  Output module 120/240VAC 2 amps 5 point isolated.

IC694MDL390CA  Conformal Coated OUTPUT module 120/240 VAC 2A 5 point, isolated per point

IC694MDL632  Input module 125 VDC 8 point POS/NEG logic.

IC694MDL632CA  Conformal Coated Input module 125 VDC 8 point NEG/POS logic.

IC694MDL632LT  Low Temperature Tested Input module 125 VDC 8 point POS/NEG logic.

IC694MDL634  Input module 24 VDC 8 point POS/NEG logic.

IC694MDL634LT  Low Temperature Tested Input module 24 VDC 8 point POS/NEG logic.

IC694MDL635  Input module 125 VDC 16 point POS/NEG logic. Module does not have UL certification on revision A.

IC694MDL635CA  125VDC, 16 point input module conf coat

IC694MDL645  Input module 24 VDC 16 point POS/NEG logic.

IC694MDL645CA  Conformal Coated Input module 24VDC 16 point POS/NEG logic

IC694MDL645LT  Low Temperature Tested. Input module 24 VDC 16 point POS/NEG logic.

IC694MDL646  INPUT MODULE 24 VDC 16 POINT POS/NEG LOGIC 1 MSEC FILTER

IC694MDL646CA  Conformal Coated Input module 24 VDC 16 point POS/NEG logic. 1msecond filtering.

IC694MDL646LT  Low Temperature Tested Input module 24 VDC 16 point POS/NEG logic. 1msecond filtering.

IC694MDL648  48VDC Input, Neg/Pos Logic, 1 msec filter, Neg/Pos Logic (16 points)

IC694MDL648CA  Conformal Coated 48VDC Input, Neg/Pos Logic, 1 msec filter, Neg/Pos Logic (16 points)

IC694MDL654  Input module 5/12 VDC (TTL) 32 point POS/NEG logic.

IC694MDL654CA  Conformal Coated Input module 32 points 5/12VDC TTL POS/NEG logic. Termi nation is a Fujitsu connector.

IC694MDL654LT  Low Temperature Tested Input module 5/12 VDC (TTL) 32 point POS/NEG logic.

IC694MDL655  Input module 24 VDC 32 point POS/NEG logic.

IC694MDL655CA  Conformal Coated Input module 24 VDC POS/NEG logic 32 points. 1msec filter. Interface is a Fujitsu connector.

IC694MDL655LT  Low Temperature Tested Input module 24 VDC 32 point POS/NEG logic.

IC694MDL658  INPUT 48 VDC POS/NEG 32PT FAST. Wiring termination is two Fujitsu connectors.

IC694MDL660  RX3i 24VDC Input Module 32 point. Module is supported by serial bus andis not limited to the universal base or expansion base. The module requires a terminal block (IC694TBB032 box style or IC694TBS032 spring clamp style terminal block). Terminal bloc

IC694MDL660CA  RX3i 24VDC Input Module 32 point. Module is supported by serial bus andis not limited to the universal base or expansion base. The module requires a terminal block (IC694TBB032 box style or IC694TBS032 spring clamp style terminal block). Terminal bloc

IC694MDL730  OUTPUT MODULE 12/24 VDC 2AMPS 8 POINTS POSIVIVE LOGIC

IC694MDL732  Output module 12/24 VDC 0.5 amps 8 points, positive logic.

IC694MDL734  Output module 125VDC 1 amp 6 points isolated POS/NEG logic.

IC694MDL734CA  Conformal Coated Output module 125VDC, 1amp, 6 point, isolated per point.

IC694MDL740  Output module 12/24 VDC 0.5 amps 16 points, positive logic.

IC694MDL740CA  Conformal Coated Output module 12/24 VDC 0.5 amps 16 points, positive logic.

IC694MDL741  Output module 12/24 VDC 0.5 amps 16 points, negative logic.

IC694MDL741CA  Conformal Coated Output module 12/24 VDC 0.5 amp 16 points NEG logic.

IC694MDL741LT  Low Temperature Tested Output module 12/24 VDC 0.5 amps 16 points, negative logic.

IC694MDL742  Output module 12/24VDC, 1 amp 16 point positive logic ESCP protection.

IC694MDL742CA  Conformal coated output module 12/24 VDC 1amp 16 point positive logic ESCP protection

IC694MDL742LT  Low Temperature Tested Output module 12/24VDC, 1 amp 16 point positive logic ESCP protection.

IC694MDL752  Output module 5/24VDC (TTL) 0.5 amp 32 point negative logic.

IC694MDL752CA  Conformal Coated Output module, 5/12-24VDC, 32 point NEG logic.

IC694MDL752LT  Low Temperature Tested Output module 5/24VDC (TTL) 0.5 amp 32 point negative logic.

IC694MDL753  Output module, 12/24VDC POS logic, 32 points. Interface uses Fujitsu connector.

IC694MDL753CA  Output module, 12/24VDC POS logic, 32 points. Interface uses Fujitsu connector.

IC694MDL753LT  Low Temperature Tested Output module, 12/24VDC POS logic, 32 points. Interface uses Fujitsu connector.

IC694MDL754  12/24VDC Output (0.75 amps/point)Module 32 point. Requires terminal block IC694TBBx32 box style or IC694TBSx32 spring clamp. Terminal block is sold seperately. Output response Time is 0.5ms.

IC694MDL754CA  Conformal Coated. 12/24VDC Output (0.75 amps/point)Module 32 point. Requires terminal block IC694TBBx32 box style or IC694TBSx32 spring clamp. Terminal block is sold seperately. Output response Time is 0.5ms.

IC694MDL758  Output module, 12/24VDC POS logic, 32 points, 0.5amp per point. Module requires terminal block IC694TBx032. Terminal block doesn't ship with module.

IC694MDL758CA  Conformal Coated version output module, 12/24VDC POS logic, 32 points, 0.5amp per point. Module requires terminal block IC694TBx032. Terminal block doesn't ship with module.

IC694MDL758LT  Low Temperature version output module, 12/24VDC POS logic, 32 points, 0.5amp per point. Module requires terminal block IC694TBx032. Terminal block doesn't ship with module.

IC694MDL916  Output module, Isolated Relay, Normally Open, 4 Amp, 16 point. Requires High Density Terminal Block (IC694TBBx32 or IC694TBSx32). Only compatible with RX3i.Compatible high speed serial bus on both Universal Base and Standard expansion base.

IC694MDL930  Output module, relay 4 amp, 8 point isolated per point.

IC694MDL930CA  Conformal Coated Relay Output module, 4 amp 8 point isolated

IC694MDL931  Output module, relay 3 amp form B and C; 8 point isolated

IC694MDL940  Output module, relay 2 amp 16 point, non isolated.

IC694MDL940CA  Conformal Coated Relay Output module 2 amp, non isolated 16 points.

IC694MDL940LT  Low Temperature Tested Output module, relay 2 amp 16 point, non isolated.

IC694MDR390  Mixed I/O, 24Vdc Input (8 points), Relay Output (8 points)

IC694PSK001  Kit consists of: (1) IC694PSM001 module, (1) IC694ACC200 terminal assembly and (2) IC694CBL200 interface cables.

IC694PSK001CA  POWER SYNC AND MEASUREMENT KIT CON COAT

IC694PWR321  Power Supply 120/240 VAC 125 VDC Standard

IC694PWR321CA  Conformal Coated Power Supply 120/240VAC, standard.

IC694PWR330  Power Supply 120/240 Vac 125 Vdc High Capacity

IC694PWR330CA  Conformal Coated Power Supply 120/240VAC 125VDC, added capacity.

IC694PWR331  Power Supply 24 Vdc High Capacity.

IC694PWR331CA  Conformal Coated Power Supply 24VDC, added capacity

IC694RTB032  High Density remote block, 32 point, terminal block. Compatible with IC695ALGxxx, IC694MDL660 and IC693MDL660 modules only. Output modules not supported. Requires a IC694TBC032 and a IC694CBL005, IC694CBL010, IC694CBL030, IC694CBL130 cable.

IC694TBB032  Box Style High Density Terminal Block - 36 Connections

IC694TBB132  Box Style High Density Terminal Block with extended depth for large wires - 36 Connections

IC694TBC032  High Density, 32 point, terminal block with cable connector. Compatible with IC695ALGxxx, IC694MDL660 and IC693MDL660 modules only. Output modules not supported. Requires a IC694CBL005, IC694CBL010, IC694CBL030 IC694CBL130 cable. Compatible with IC69

IC694TBS032  Spring Clamp Style High Density Terminal Block - 36 Connections

IC694TBS132  Spring clamp style High Density Terminal Block with extended depth for l arge wires - 36 Connections

IC695ACC002  Replacement plastic cases for RX3i CPU and AC PS, quantity 4. Does not include front cover.

IC695ACC003  Door labels for RX3i IC695xxx I/O modules. Kit includes 2 each of IC695ALG600, IC695ALG608, IC695ALG616, IC695ALG626, IC695ALG628, IC695ALG704, IC695ALG708, IC695ALG728, IC695HSC304, IC695HSC308

IC695ACC302  Auxiliary Smart Battery Module for PACSystems. Provides low battery signal to the CPU. Module mounts external to the controller.

IC695ACC400  RX3i CPU Energy Pack. Compatible with IC695CPE305 and IC695CPE310 only. Energy Pack ships with CPE305 and CPE310.

IC695ACC400CA  Conformal Coated. RX3i CPU Energy Pack. Compatible with IC695CPE305 and IC695CPE310 only. Energy Pack ships with CPE305 and CPE310.

IC695ACC402  ENERGY PACK FOR RX3I CONTROLLER

IC695ACC403  Energy Pack for RX3i CPE400 ONLY

IC695ACC412  RX3i Replacement Energy PAC CAP Module

IC695ACC413  Replacement Capacitor for CPE400 Energy Pack

IC695ACC414  Din Rail Mounting Plate for the RX3i CPE400 Rackless CPU

IC695ACC415  Flush Mount Plate for the RX3i CPE400 Rackless CPU

IC695ACC600  RX3i Cold Junction Compensation Kit \ for Universal Analog Input IC695ALG600

IC695ACC650  Series 90-70 to RX3i Mechanical Frame

IC695ACC651  SERIES 90-70 TO RX3I I/O ADAPTER CARD

IC695ACC652  Series 90-70 to RX3i 5-Slot Conv Rack

IC695ALG106  Isolated Analog module, 6 individual isolated channels are configurable for voltage and current. Requires high capacity terminal block IC694TBB032 or IC694TBS032.

IC695ALG112  Isolated Analog module, 12 individual isolated channels are configurable for voltage and current. Requires high capacity terminal block IC694TBB032 or IC694TBS032.

IC695ALG112CA  RX3i Isolated Analog module, conformal coated, 12 individual isolated channels are configurable for voltage and current. Requires high capacity terminal block IC694TBB032 or IC694TBS032.

IC695ALG306  Isolated Thermocouple Input module provides six isolated differential thermocouple input channels. Each channel can be individually configured for inputs from: Thermocouple types: J, K, T, E, R, S, B, N, or C and Voltage: +/-150mV or +/-50mV. Module req

IC695ALG312  Isolated Thermocouple Input module provides twelve isolated differential thermocouple input channels. Each channel can be individually configured for inputs from: Thermocouple types: J, K, T, E, R, S, B, N, or C and Voltage: +/-150mV or +/-50mV. Module

IC695ALG312CA  Conformal Coated. Isolated Thermocouple Input module provides twelve isolated differential thermocouple input channels. Each channel can be individually configured for inputs from: Thermocouple types: J, K, T, E, R, S, B, N, or C and Voltage: +/-150mV o

IC695ALG412  High Speed 12 channel isolated thermocouple module with increased noise rejection. Requires firmware and software 6.5 and higher.

IC695ALG412CA  Conformal Coated. High Speed 12 channel isolated thermocouple module with increased noise rejection. Requires firmware and software 6.5 and higher.

IC695ALG508  RX3i Isolated RTD Input module provides eight isolated differential RTD input channels. Each channel can be individually configured for 2, 3, 4 wire RTD or Resistance. Requires high capacity terminal block IC694TBB032 or IC694TBS032

IC695ALG508CA  Conformal Coated RX3i Isolated RTD Input module provides eight isolated differential RTD input channels. Each channel can be individually configured for 2, 3, 4 wire RTD or Resistance. Requires high capacity terminal block IC694TBB032 or IC694TBS032

IC695ALG508LT  Low Temperature Tested RX3i Isolated RTD Input module provides eight isolated differential RTD input channels. Each channel can be individually configured for 2, 3, 4 wire RTD or Resistance. Requires high capacity terminal block IC694TBB032 or IC694TBS0

IC695ALG600  UNIVERSAL ANALOG MODULE. 8 CHANNELS OF ANALOG CONFIGURABLE FOR THERMOCOUPLE,RTD, RESISTIVE, CURRENT, OR VOLTAGE. 2 ISOLATED GROUPS, 4 CHANNELS PER GROUP. Terminal block ordered separately.

IC695ALG600CA  Conformal Coated Universal Analog Input module. Terminal block not included.

IC695ALG600LT  Low Temperature Tested (-40 to 60C) UNIVERSAL ANALOG MODULE. 8 CHANNELS OF ANALOG CONFIGURABLE FOR THERMOCOUPLE,RTD, RESISTIVE, CURRENT, OR VOLTAGE. 2 ISOLATED GROUPS, 4 CHANNELS PER GROUP. Terminal block ordered separately.

IC695ALG608  Analog Input module, 8 channels single ended, 4 channels differential, channels are configurable for voltage and current. Can be configured for Current: 0 to 20mA, 4 to 20mA, +/- 20mA; Voltage: +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V. The analog i

IC695ALG608CA  Conformal Coated Analog Input Module, 8 Channel voltage/current. Module does not include terminal block.

IC695ALG608RS  Refurbished Analog Input module, 8 channels single ended, 4 channels differential, channels are configurable for voltage and current. Can be configured for Current: 0 to 20mA, 4 to 20mA, +/- 20mA; Voltage: +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V.

IC695ALG616  Analog Input module, 16 channels single ended, 8 channels differential, channels are configurable for voltage and current. Can be configured for Current: 0 to 20mA, 4 to 20mA, +/- 20mA; Voltage: +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V. The analog

IC695ALG616CA  Conformal Coated Analog Input Module,16 channel voltage/current.

IC695ALG616RS  Refurbished Analog Input module, 16 channels single ended, 8 channels differential, channels are configurable for voltage and current. Can be configured for Current: 0 to 20mA, 4 to 20mA, +/- 20mA; Voltage: +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V.

IC695ALG626  Analog Input HART module, 16 channels single ended, 8 channels differential,channels are configurable for voltage,current and current/ HART. Supports Current: 0 to 20mA, 4 to 20mA, +/- 20mA; Voltage: +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V. The ana

IC695ALG626RS  Refurbished Analog Input HART module, 16 channels single ended, 8 channels differential,channels are configurable for voltage,current and current/ HART. Supports Current: 0 to 20mA, 4 to 20mA, +/- 20mA; Voltage: +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5

IC695ALG628  Analog Input HART module, 8 channels single ended, 4 channels differential,channels are configurable for voltage,current and current/ HART. Supports Current: 0 to 20mA, 4 to 20mA, +/- 20mA; Voltage: +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V. The anal

IC695ALG628RS  Refurbished Analog Input HART module, 8 channels single ended, 4 channels differential,channels are configurable for voltage,current and current/ HART. Supports Current: 0 to 20mA, 4 to 20mA, +/- 20mA; Voltage: +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V

IC695ALG704  Analog Output Module, 4 channels,that is configurable for voltage and current, configured for Current: 0 to 20mA, 4 to 20mA; Voltage: +/- 10 VDC, 0 to 10VDC per channel non isolated. Up to 16 bit resolution. Requires high capacity terminal block IC694T

IC695ALG704CA  Conformal Coated Analog Output Module,4 channel voltage/current. Module does not include terminal block.

IC695ALG708  Analog Output Module, 8 channels,that is configurable for voltage and current, configured for Current: 0 to 20mA, 4 to 20mA; Voltage: +/- 10 VDC, 0 to 10VDC per channel non isolated. Up to 16 bit resolution. Requires high capacity terminal block IC694T

IC695ALG708CA  Conformal Coated Analog Output Module,8 channel voltage/current. Moduledoes not include terminal block.

IC695ALG708LT  Low Temperature Tested (-40 to 60C) Analog Output Module, 8 channels,that is configurable for voltage and current, configured for Current: 0 to 20mA, 4 to 20mA; Voltage: +/- 10 VDC, 0 to 10VDC per channel non isolated. Up to 16 bit resolution. Requires

IC695ALG728  Analog Output HART Module, 8 channels,that is configurable for voltage, current, current/HART configured for Current: 0 to 20mA, 4 to 20mA; Voltage: +/- 10VDC, 0 to 10VDC per channel non isolated. Up to 16 bit resolution. Requires high capacity termina

IC695ALG808  Isolated Analog Output module, 8 channels, that is configurable for voltage and current. Requires high capacity terminal block IC694TBB032 or IC694TBS032.

IC695ALG808CA  RX3i Isolated Analog Output module conformal coated, 8 channels, that is configurable for voltage and current. Requires high capacity terminal block IC694TBB032 or IC694TBS032.

IC695CBL001  Energy Pack Cable, 3 ft. (0.91m)

IC695CBL003  Replacement Cable for CPE400 Energy Pack

IC695CBL010-FD-001  CABLE DUPLEX MULTIMODE FIBER, 6FT

IC695CBL010-FD-002  CABLE DUPLEX MULTIMODE FIBER, 10FT

IC695CBL010-FD-003  CABLE DUPLEX MULTIMODE FIBER, 16FT

IC695CBL010-FS-002  CABLE SIMPLEX MULTIMODE FIBER, 5FT

IC695CBL010-FS-003  CABLE SIMPLEX MULTIMODE FIBER, 10FT

IC695CBL010-FS-004  CABLE SIMPLEX MULTIMODE FIBER, 25FT

IC695CDEM002  RX3i type 2 demo case for Chinese market. Demo includes CPU, power supply, Ethernet, input simulator, output with ESCP, high speed counter, Universal analog and analog output modules. Demo also includes QuickPanel control/view includes thermocouple, RT

IC695CDEM006  Simulation Software for 35 clients

IC695CEP001  RX3i CEP CARRIER W/ RJ45 COPPER ETHERNET

IC695CHS007  7 Slot Universal Base. Slot 0 limited to power supply (IC695PSxxx) only and slot 6 is a PCI slot only (IC695xxx). Slots 1 through 5 support both PCI and high speed serial connection (IC695xxx and IC694xxx)

IC695CHS007CA  RX3I 7-SLOT UNIVERSAL BACKPLANE, CONFO

IC695CHS007LT  RX3i 7-slot Universal Backplane Low Temperature tested.

IC695CHS012  RX3i 12 slot universal base

IC695CHS012CA  RX3i 12 slot universal backplane. Conformal Coated.

IC695CHS012LT  Low Temperature Tested (-40 to 60C) RX3i 12 slot universal base

IC695CHS016  RX3i 16 universal modules slots base

IC695CHS016CA  RX3i 16 universal slots backplane with conformal coating.

IC695CHS016LT  Low Temperature Tested (-40 to 60C) RX3i 16 universal modules slots base

IC695CKL410  RX3I CPL410 WITH ENERGY PACK

IC695CMM002  RX3i serial communications module. Two isolated RS-232/485 port. Supports Serial Read/Write and Modbus Master/Slave. Requires Unversal Backplane.

IC695CMM002CA  RX3i serial communications module. Two isolated RS-232/485 port. Supports Serial Read/Write and Modbus Master/Slave. Requires Unversal Backplane. Conformal Coated

IC695CMM002LT  Low Temperature Tested (-40 to 60C) RX3i serial communications module. Two isolated RS-232/485 port. Supports Serial Read/Write and Modbus Master/Slave. Requires Unversal Backplane.

IC695CMM004  RX3i serial communications module. Four isolated RS-232/485 port. Supports Serial Read/Write and Modbus Master/Slave. Requires Unversal Backplane.

IC695CMM004LT  Low Temperature Tested (-40 to 60C) RX3i serial communications module. Four isolated RS-232/485 port. Supports Serial Read/Write and Modbus Master/Slave. Requires Unversal Backplane.

IC695CMU310RS  Refurbished The CMU310 is on marketing hold due to component shortage. Please quote IC695CRU320 High Availability and request special pricing to match IC695CRU320 and IC695RMX128. RX3i Redundant High Availability CPU with two built-in serial ports. TheCP

IC695CMX128  Control Memory Xchange Module 128Megbytes of user shared memory.

IC695CPE302  RX3I CPE302,1 SER,1 ETH PORT

IC695CPE305  CPE305 single slot CPU, 1.1Ghz processor,5 Meg user memory, 1 RS-232 port (compatible with IC693CBL316 cable), 1 Ethernet port (SRTP and Modbus). Ships with Energy PAC (IC695ACC400 and IC695CBL001 connection cable).

IC695CPE305CA  Conformal Coated. CPE305 single slot CPU, 1.1Ghz processor,5 Meg user memory, 1 RS-232 port (IC693CBL316 cable), 1 Ethernet port (SRTP Programmer support only) and a USB master port upload/download only. Ships with Energy PAC IC695ACC400).

IC695CPE305LT  RX3i CPE305, 1 serial port, 1 Ethernet port l low temperature tested.

IC695CPE310  CPE310 2 slot CPU, 1.1Ghz processor,10 Mg memory, 1 RS-232 port, 1 RS- 485 port,1 Ethernet port (SRTP, Modbus) and USB master port for application upload/download. Replacement for IC695CPU310. CPE310 ships with Energy PAC (IC695ACC400 and IC695CBL001).

IC695CPE310CA  Conformal Coated. CPE310 2 slot CPU, 1.1Ghz processor,10 Meg memory, 1 RS-232 port, 1 RS- 485 port,1 Ethernet port (SRTP programmer support only) and USB master port for application upload/download only.Replacement for IC695CPU310. CPE310 ships with Ene

IC695CPE310LT  Low Temperature Tested (-40 to 60C) CPE310 2 slot CPU, 1.1Ghz processor,10 Mg memory, 1 RS-232 port, 1 RS- 485 port,1 Ethernet port (SRTP, Modbus) and USB master port for application upload/download. Replacement for IC695CPU310. CPE310 ships with Energy

IC695CPE330  2-SL DUALCORE 1GHZ 64MB CPU W/ETHE

IC695CPE330CA  2-SL DUALCORE 1GHZ 64MB CPU W/ETHE CONF

IC695CPE400  PACSystems RX3i Rackless CPU, 6 Ethernet ports, PREDIX enabled, mounting plates

IC695CPE400CA  CPE400 4C-1.2GHz 5xRJ45 128GB CONF

IC695CPK330  RX3I CPE330 WITH ENERGY PACK

IC695CPK330-AAAA  RX3i CPE330 with Energy Pack

IC695CPK330CA  RX3I CPE330 WITH ENERGY PACK CONF COAT

IC695CPK400  PACSystems RX3i Rackless CPU with mounting plates and Energy Pack

IC695CPL410  RX3I CPL410 4C-1.2GHZ 5XRJ45 128GB W PAC

IC695CPU315  1Ghz CPU with 20Meg of memory 2 SERIAL PORTS (occupies two slots on system base). Battery not included, order external high capacity battery IC693ACC302 seperately. Estimate data retention is 30 days at 20C of continous battery back up.

IC695CPU315CA  RX3I 1GHZ CPU W/2 SER PORTS CONF COAT

IC695CPU320  1Ghz CPU with 64Meg of memory 2 SERIAL PORTS (occupies two slots on system base). Battery not included, order external high capacity battery IC693ACC302 seperately. Estimate data retention is 30 days at 20C of continous battery back up.

IC695CRH001  9070 MDL252 TO RX3I MDL241 HARNESS ASM

IC695CRH002  9070 MDL253 TO RX3I MDL241 HARNESS ASM

IC695CRH003  9070 MDL250 TO RX3I MDL260 HARNESS ASM

IC695CRH004  9070 MDL240 TO RX3I MDL250 HARNESS ASM

IC695CRH006  9070 MDL251TO RX3i MDL250 Harness Asm

IC695CRH007  9070 MDL241 TO RX3I MDL231 HARNESS ASM

IC695CRH008  9070 MDL653 TO RX3I MDL660 HARNESS ASM

IC695CRH009  9070 MDL652 TO RX3I MDL654 HARNESS ASM

IC695CRH010  9070 MDL654 TO RX3I MDL658 HARNESS ASM

IC695CRH011  9070 MDL640 TO RX3I MDL632 HARNESS ASM

IC695CRH012  9070 MDL651 TO RX3I MDL654 HARNESS ASM

IC695CRH013  9070 MDL671 TO RX3I MDL645 HARNESS ASM

IC695CRH014  9070 MDL350 TO RX3I MDL340 HARNESS ASM

IC695CRH015  9070 MDL340 TO RX3I MDL330 HARNESS ASM

IC695CRH016  9070 MDL340 TO RX3I MDL350 HARNESS ASM

IC695CRH017  9070 MDL341 TO RX3I MDL350 HARNESS ASM

IC695CRH018  9070 MDL341 TO RX3I MDL390 HARNESS ASM

IC695CRH019  9070 MDL752 TO RX3I MDL753 HARNESS ASM

IC695CRH020  9070 MDL750 TO RX3I MDL753 HARNESS ASM

IC695CRH021  9070 MDL940 TO RX3I MDL931 OR 940 HRNASM

IC695CRH022  9070 MDL940 TO RX3I MDL916 HARNESS ASM

IC695CRH023  9070 ALG230 TO RX3I ALG616 HARNESS ASM

IC695CRH024  9070 ALG230 TO RX3I ALG220 HARNESS ASM

IC695CRH025  9070 ALG230 TO RX3I ALG221 HARNESS ASM

IC695CRH026  9070 ALG230 TO RX3I ALG222 HARNESS ASM

IC695CRH027  9070 ALG230 TO RX3I ALG232 HARNESS ASM

IC695CRH028  9070 ALG440 TO RX3I ALG616 HARNESS ASM

IC695CRH029  9070 ALG440 TO RX3I ALG220 HARNESS ASM

IC695CRH030  9070 ALG440 TO RX3I ALG221 HARNESS ASM

IC695CRH031  9070 ALG441 TO RX3I ALG616 HARNESS ASM

IC695CRH032  9070 ALG441 TO RX3I ALG220 HARNESS ASM

IC695CRH033  9070 ALG441 TO RX3I ALG222 HARNESS ASM

IC695CRH034  9070 ALG441 TO RX3I ALG232 HARNESS ASM

IC695CRH035  9070 ALG320 TO RX3I ALG708 HARNESS ASM

IC695CRH036  9070 ALG320 TO RX3I ALG390 HARNESS ASM

IC695CRH037  9070 ALG320 TO RX3I ALG391 HARNESS ASM

IC695CRH038  9070 MDL740 to RX3i MDL765 Harness ASM

IC695CRH039  9070 MDL753 to RX3i MDL765 Harness ASM

IC695CRU320  1Ghz CPU with 64Meg of memory 2 SERIAL PORTS (occupies two slots on system base) redundant CPU. External high capacity battery IC693ACC302 required. The CRU320 supports both Genius LAN and Ethernet LAN. Dual Genius LAN is supported by an application c

IC695CRU320CA  Conformal coated. 1Ghz CPU with 64Meg of memory 2 SERIAL PORTS (occupies two slots on system base) redundant CPU. External high capacity battery IC693ACC302 required. The CRU320 will only work with RX3i ENIU remote I/O and Genius LAN.

IC695CRU320QP  QuadPAC redundant controller. 1Ghz CPU with 64Meg of memory 2 SERIAL PORTS (occupies two slots on system base). External high capacity battery IC693ACC302 required.

IC695DEM002  RX3i type 2 demo case. Demo includes CPU, power supply, Ethernet, input simulator, output with ESCP, high speed counter, Universal analog and analog output modules. Demo also includes QuickPanel control/view includes thermocouple, RTD, analog pot, anal

IC695DEM004  Beta i Series 1-Axis Motion Demo Case for use with PACMotion or DSM324i motion controllers

IC695DEM006  PMM Demo Case: RX3i and PACMotion

IC695DEM008  Fieldbus Demo Case: RX3i and Fieldbus

IC695DEMP002  RX3i Demo Case - China

IC695ECM850  RX3I IEC 61850 COMMUNCIATION MODULE

IC695ECM850CA  RX3I IEC 61850 COMMUNCIATION MODULE - CO

IC695EDS001  PACSYSTEMS RX3I DNP3 ETHERNET OUTSTATION

IC695EDS001  RX3I ETHERNET DNP3 OUTSTATION MDL,10/100

IC695EDS001CA  RX3I DNP3 ETHERNET OUTSTATION -CONF COAT

IC695EIS001  PACSYSTEMS RX3I IEC-60870-5-104 SERVER

IC695ETM001  Ethernet module 10/100 Mbits 2 RJ45 connections one IP address occupies one slot on system base

IC695ETM001CA  RX3i Ethernet Mdl,10/100Mbits,Conformal Coated.

IC695ETM001LT  Low Temperature Tested (-40 to 60C) Ethernet module 10/100 Mbits 2 RJ45 connections one IP address occupies one slot on system base

IC695FTB001  FIBER OPTIC TERMINAL BOARD FOR PMM335

IC695FTB1B032  Fiber terminal Block kit includes the IC695FTB001 base plus two IC694TBS032 high density box style screw terminal blocks

IC695FTB1B132  Fiber terminal Block kit includes the IC695FTB001 base plus two IC694TBS032 high density extended shroud box style screw terminal blocks

IC695FTB1S032  Fiber terminal Block kit includes the IC695FTB001 base plus two IC694TBS032 high density spring style terminal blocks

IC695FTB1S132  Fiber terminal Block kit includes the IC695FTB001 base plus two IC694TBS032 high density extended shroud spring style terminal blocks

IC695GCG001  RX3I GENIUS COMM GATEWAY

IC695GCG001-AA  RX3I GENIUS GATEWAY

IC695HSC304  RX3i High Speed Counter, 4 channels. 8 configurable inputs and 7 configurable ESCP outputs. Module supports high speed counting, input interrupts and programmable limit switch.

IC695HSC308  RX3i High Speed Counter, 8 channels. 16 configurable inputs and 14 configurable outputs. Supports high speed counting, interrupts and programmable limit switch. Module requires PCI bus with terminal block IC694TBxx32E (E) revision and above.

IC695LRE001  RX3i Local Expansion Module Occupies no system slots on base

IC695LRE001CA  RX3i Local Serial Expansion Conformal Coated.

IC695MDL664  Smart Digital 24VDC Input module, 16 input channels in two groups of eight. Module does not ship with terminal block. IC694TBB032 or IC694TBSx032 terminal block is required.

IC695MDL664CA  Conformal Coated. Smart Digital 24VDC Input module, 16 input channels in two groups of eight. Module does not ship with terminal block. IC694TBB032 or IC694TBSx032 terminal block is required.

IC695MDL765  Smart Digital Output Module 24/125 volt DC, ESCP 1A Positive Logic 16 Points. Module does not ship with terminal block. IC694TBB032 or IC694TBSx032 terminal block is required.

IC695MDL765CA  Conformal Coated. Smart Digital Output Module 24/125 volt DC, ESCP 1A Positive Logic 16 Points. Module does not ship with terminal block. IC694TBB032 or IC694TBSx032 terminal block is required.

IC695MGMT1YR  ANNUAL RX3I FIELD AGENT MANAGEMENT FEE

IC695NIU001  RX3i NIU with two serial ports and 20K of local logic. Module requires Universal base (IC695CHSxxx) and requires Ethernet module (IC695ETM001).NIU supports all RX3i I/O modules.

IC695NIU001CA  RX3i NIU, requires Ethernet module to be fully functional. Module is conformal coated. NIU only works in RX3i universal base.

IC695NKT001  RX3i Ethernet NIU Kit includes NIU (IC695NIU001) and Ethernet module (IC695ETM001). ENIU supports two serial ports and 20k of local logic. TheENIU must be installed in a IC695CHSxxx base.

IC695NKT001CA  RX3i Ethernet NIU Kit Conformal Coated includes NIU (IC695NIU001) and Ethernet module (IC695ETM001). ENIU supports two serial ports and 20k of local logic. TheENIU must be installed in a IC695CHSxxx base.

IC695NKT002  RX3i Ethernet NIU Kit with two Ethernet modules.

IC695NKT002CA  RX3i one NIU001 and two ETM001 Conformal

IC695PBM300  RX3i PROFIBUS Master Module (must be installed on RX3i PCI bus). The mo dule supports PROFIBUS V1 Master functionality.

IC695PBM300CA  RX3i PROFIBUS Master, Conformal Coated, Module (must be installed on RX3i PCI bus). The module supports PROFIBUS V1 Master functionality.

IC695PBM300LT  RX3i Profibus Master Module Low Temp

IC695PBS301  RX3i Profibus Slave module supports V1 functionality.

IC695PMM335  PACMotion 4-axis servo motion controller for RX3i

IC695PNC001  Profinet Controller. The PNC module provides all the functions, services, and protocols required for certification as a PROFINET IO Version 2.2 device, running at both 100Mbps and 1Gbps. Compatible with IC695CPU315, CPU320, CPE310 and CPE305 only and r

IC695PNC001CA  Conformal Coated. Profinet Controller. The PNC module provides all the functions, services, and protocols required for certification as a PROFINET IO Version 2.2 device, running at both 100Mbps and 1Gbps. Compatible with IC695CPU315, CPU320, CPE310 and

IC695PNC001LT  Low Temperature Tested (-40 to 60C) Profinet Controller. The PNC module provides all the functions, services, and protocols required for certification as a PROFINET IO Version 2.2 device, running at both 100Mbps and 1Gbps. Compatible with IC695CPU315,

IC695PNS001  RX3I PROFINET SCANNER MODULE (WEB UPGR

IC695PNS001CA  RX3I PROFINET SCANNER MODULE

IC695PNS101  RX3I ADVANCED PROFINET SCANNER MODULE

IC695PRS015  Pressure Transducer module. The serial port communicates with up to 15 Honeywell LG1237 Smart Pressure Transducer sensors. Requires firmware/software 6.5 or higher.

IC695PSA040  RX3I Power supply 120/240VAC and 125VDC 40 watts occupies two slots on s ystem base.

IC695PSA040CA  RX3i AC Power Supply, 40 Watt Conformal Coated

IC695PSA040LT  Low Temperature Tested (-40 to 60C) RX3I Power supply 120/240VAC and 125VDC 40 watts occupies two slots on s ystem base.

IC695PSA140  120/240VAC, 125VDC Multipurpose Power Supply is suitable for use in load -sharing and redundancy application. It must be installed in a PACsystems RX3i (IC695catalog number) Universal Backplane. It can be used as the only power supply in the backplane, o

IC695PSA140CA  RX3i Conformal Coated 120/240VAC, 125VDC Multipurpose Power Supply is suitable for use in load-sharing and redundancy application.

IC695PSA140LT  Low Temperature Tested (-40 to 60C) 120/240VAC, 125VDC Multipurpose Power Supply is suitable for use in load-sharing and redundancy application. It must be installed in a PACsystems RX3i (IC695catalog number) Universal Backplane. It can be used as the on

IC695PSD040  RX3i 24VDC power supply, 40 watts.

IC695PSD040CA  RX3i 24VDC power supply, 40 Watt Conformal Coated.

IC695PSD040LT  RX3i 24VDC Power Supply, 40 Watt Low Temperature tested

IC695PSD140  Multipurpose Power Supply is suitable for use in load-sharing and redund ancy application. It must be installed in a PACsystems RX3i (IC695catalog number) Universal Backplane.

IC695PSD140CA  24VDC Multipurpose Power Supply CONFORMAL COATED is suitable for use in load-sharing and redundancy application. It must be installed in a PACsystems RX3i (IC695catalog number) Universal Backplane. It can be used as the only power supply in the backplan

IC695PSD140LT  RX3i Multi function 24VDC PS, 40W Low temperature tested

IC695RMX128  RX3i Redundant Memory Xchange Module for High Availability. 2Megbytes of user shared memory. Dual Genius LAN is supported using application code that is located on the ge-ip.com/support website.

IC695RMX128CA  Conformal coated. RX3i Redundant Memory Xchange Module for High Availability. 2Megbytes of user shared memory.

IC695RMX228  RX3I CONTROL MEMORY XCHANGE MDL, 10 KM

IC695SOE001  RX3I SOE NIU STATION

IC695SPC100  RX3i 10/100/1000base-TX (CAT5 100m) Small Form Pluggable Transceiver

IC695SPF002  RX3i Multimode, 100Base-FX (fiber 2km) Small Form Pluggable Transceiver Module

IC695SPF010  RX3i Single 1000base-LX (fiber 10 km) Small Form Pluggable Transceiver Module

IC695SPF550  RX3i 1000Base-SX (fiber 550 m) SFP (Multi-mode fiber - MMF)RX3i 1000Base-SX (fiber 550 m) SFP (Multi-mode fiber - MMF)

IC695STK001  RX3i Power PACkage 1 Starter Kit includes RX3i with software. (includesRX3i with software. (includes one each IC695CP305,IC695CHS012, IC695LRE001, IC695PSA040, IC695ETM001, IC694ACC300, IC694MDL940 and IC646MPP001.) Limited one RX3i starter kit per cus

IC695STK002  RX3i Power PACkage 2 Starter Kit includes RX3i and QuickPanel View 6 inch STD with software (one each IC695CPE305/ IC695CHS012/ IC69 5LRE001/ IC695PSA040/ IC695ETM001/ IC694ACC300/ IC694MDL940/ IC754VSI06STD/ BC646MQP001/ IC646MPP001 and DC power)

IC695STK003  RX3i Power PACkage 3 Starter Kit includes RX3i(CPE305)/ motion module (Servo andAmplifier sold seperately) and QuickPanel View 6 inch STD wi th software

IC695STK004  RX3i Power Package 4 Starter Kit - CPU with 3 Ethernet Ports Includes PROFICY Machine Edition PROFESSIONAL SUITE License Includes IC695PSA140, IC695CPE330, IC695ACC402, IC695CHS012

IC695STK005  RX3i Power PACkage 5 Starter Kit CPU with 1 Ethernet Port. Includes PROFICY Machine Edition PROFESSIONAL SUITE License Includes IC695PSA140, IC695CPE305, IC695CHS012

IC695STK006  RX3i Power Package 6 Starter Kit CPU with 3 Ethernet Ports. Includes PROFICY Machine Edition PROFESSIONAL SUITE License Includes IC695PSD140, IC695CPE330, IC695ACC402, IC695CHS012

IC695STK007  RX3i Power PACkage 7 Starter Kit CPU with 1 Ethernet Port. Includes PROFICY Machine Edition PROFESSIONAL SUITE License Includes IC695PSD140, IC695CPE305, IC695CHS012

IC695STK010  RX3i Profinet Starter Kit. Limited to one per customer per customer site. Kit includes CPE305, 7 slot base, AC power supply, input and output module, Profinet controller, VersaMax Profinet slave, combination I/O and Proficy Machine Edition.

IC695STK011  RX3i and RST Starter kit w/ Profinet

IC697ACC621  115VAC fan tray to be used with Series 90-70 or RX7i short racks.

IC697ACC624  230VAC fan tray for the Series 90 70 or RX7i short racks.

IC697ACC644  24VDC fan tray for Series 90-70 or RX7i short racks.

IC697ACC700  Terminal Block, 40 Contacts (qty 6)

IC697ACC701  Replacement Battery, CPU & PCM (qty 2)

IC697ACC702  I/O Bus Terminator Plug

IC697ACC715  Kit, VME Integrator, J2 Backplane Mounting

IC697ACC720  Blank Slot Filler, full slot rack (qty. 6)

IC697ACC721  Rack Cooling Fan, 115 Volt

IC697ACC722  VME Backplane Connector, Interrupt Jumper (qty 6)

IC697ACC723  Clear Plastic Doors (qty 6)

IC697ACC724  Rack Cooling Fan, 230 Volt

IC697ACC726  Top PWA Cover, CPU-Style, (Quantity 6)

IC697ACC727  Top and Bottom PWA Cover - GBC (Quantity 2)

IC697ACC728  Top and Bottom PWA Cover - BTM/BTR (Quantity 2)

IC697ACC729  Top and Bottom PWA Cover - I/O Link

IC697ACC730  Spare Slot Terminal Strip Retainer (Quantity 1)

IC697ACC732  Top PWA Cover - CPU77x and CPU78x (Qty 2)

IC697ACC735  Blank Slot Filler, half slot integrators rack (qty. 6)

IC697ACC744  Rack Cooling Fan, 24 VDC

IC697ACC775  Gold plated analog terminal blocks for IC697ALG234, IC697ALG324, IC697ALG444 and IC697ALG445. Qty 6 blocks in package.

IC697ACC800  Fiber Optic Cable for Reflective Memory module (IC697VRM015). Five fe et long.

IC697ACC801  I/O Cable (96 conductor) for IC697Vxxxxx modules. Five feet long

IC697ACC802  I/O Cable (64 conductor) for IC697Vxxxxx modules. Five feet long

IC697ACC803  I/O Cable (32 conductor) for IC697Vxxxxx modules. Five feet long

IC697ACC804  I/O Cable (96 conductor) for IC697Vxxxxx modules. Ten feet long

IC697ACC805  I/O Cable (64 conductor) for IC697Vxxxxx modules. Ten feet long

IC697ACC820  DIN Rail Transition Module 32 Pin for IC697Vxxxxx modules

IC697ACC821  DIN Rail Transition Module 64 Pin for IC697Vxxxxx modules

IC697ACC822  DIN Rail Transition Module 96 Pin for IC697Vxxxxx modules

IC697ADC701  CIMPLICITY 90-ADS Coprocessor (Repeat Systems)

IC697ADC701RR  Access 90 Display Coprocessor

IC697ADS701  CIMPLICITY 90-ADS Package (First System)

IC697ALG230  Analog Input, Voltage/Current, 8 Channels

IC697ALG230RR  Analog Input, Voltage/Current, 8 Channels

IC697ALG234  Analog Input, Voltage/Current, 8 Channels gold plated terminal. WARNING: The IC697ALG234 module must be matched with IC697ACC775 terminal block ONLY. IC697ACC775 is included with the module.

IC697ALG320  Analog Output, Voltage/Current, 4 Channels

IC697ALG320RR  Analog Output, Voltage/Current, 4 Channels

IC697ALG324  Analog Output, Voltage/Current, 4 Channel sgold plated terminal. WARNING: The IC697ALG324 module must be matched with IC697ACC775 terminal block ONLY. IC697ACC775 is included with the module.

IC697ALG440  Analog Input Expander, Current, 16 Channels